Utility of Quality Control Tools and Statistical Process...

UTILITY OF QUALITY CONTROL TOOLS AND STATISTICAL PROCESS CONTROL TO IMPROVE THE PRODUCTIVITY AND QUALITY IN AN INDUSTRY RALLABANDI SRINIVASU 1 G. SATYANARAYANA REDDY 2 SRIKANTH REDDY RIKKULA 3 1. Professor Director in St. Mary’s Group of Institutions, Hyderabad, India. 2. Professor HOD-MBA in CMR College of Information Technology, Hyderabad, India 3. Associate Professor, MCA Dept. St.Mary’s College of Engg. Technology, Hyderabad ,India. E-MAIL: rsrinivasusas@gmail.com , satya3831@yahoo.com, rikkula@gmail.com ABSTRACT: Statistical Process Control (SPC) methods have been widely recognized as effective approaches for process monitoring and†¦show more content†¦In a process that is under control, by removing all special causes that are noticed until then, the remaining variability would come from common causes. After taking the process under control, the next stage improves the process. The only target for the production is to get the statistically control, and to reduce the variables in the same time. Because as the variables reduce, the cost is going to be less, too.A large variety of Statistical Process Control (SPC) schemes have been developed for quality and productivity improvement since the 1960s. SPC utilizes statistical methods to monitor manufacturing processes with an aim to maintain and improve the product quality while decreasing the variance. Much research has been conducted on the issues of SPC and the resulting developments are readily available in the literature, see surveys of research on SPC by Lowry and Montgomery (1995), Woodall and Montgomery (1999) and Stoumbos et al. (2000). Nevertheless, conventional SPC methods are typically restricted to a single process stage in industrial and service applications. Quality Control (QC) is an important function in factory as it deals with product inspection before the product was shipped to customers. Statistical process control (SPC) is one of the tools widely used in QC to monitor whether the production process is in control through the use of statistical control chart. ManyShow MoreRelatedHow Productivity Can Be Improved By Methods And Tools1274 Words   |  6 PagesINTRODUCTION The purpose of this paper is to show how productivity can be improved by implementing different methods and tools in the textile industry. First Production has to be defined like Islam (2013) said, the process or procedure to transform a set of input into output having the desired utility and quality. Productivity = Output / Input Now productivity can be measured by the efficiency of the production system. It is a way to indicate of how well the key factors of production (land, capitalRead MoreDescription Of Spc ( Statistical Process Control )2144 Words   |  9 PagesAbstract: SPC (statistical process control) is an important tool to solve the manufacturing problem and the most modernized effective scheme to obtain process durability and fostering the process pertinence decreasing the variability. In manufacturing system, products do not run up against the proper province of quality permanently with the customer desire. This impermanency appears due to various productions of variations like machines, operators, materials, etc. The main purpose of control chart is toRead MoreAccentures Strategy And Analytical Capabilities1593 Words   |  7 Pagestelecommunication industry uses bundle pricing which supports the development of effective pricing strategies for offering bundles, such as bundling a handset and a connection. Accenture also uses call volume forecaster which improves the planning, staffing and management of contact centers by providing users with insights on forecasted call volumes and the right staffing resources needed to support the center. Through an analytics –driven management process, providers can improve customer serviceRead MoreJuran Trilogy5248 Words   |  21 PagesTable of Contents Executive Summary†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.3 Introduction †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.4 Biographies †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦4 History of Total Quality Management†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦...6 Contribution to Industry.†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦8 Experiments amp; Methodologies †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.12 Contribution to Safety Field †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦15 Conclusion.†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..16 References †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..18 Executive Summary Read MoreSix Sigma Process Improvement3782 Words   |  16 PagesCHAPTER 11 SIX SIGMA AND PROCESS IMPROVEMENT TRUE/FALSE QUESTIONS 1. In Six Sigma, a problem is defined as a deviation between what should be happening and what actually is happening that is important enough to need correcting. Answer: T AACSB: Analytic Skills 2. Half the tolerance is equal to the distance from the target to the upper specification limit. Answer: T AACSB: Analytic Skills 3. A change in the quality level from 3-sigma to 4-sigma representsRead MoreExamples for Competative and Strategic Benchmarking2002 Words   |  9 Pagesarticle may require cleanup to meet Wikipedias quality standards. Please improve this article if you can. (April 2007) This article is about the business term. For the geolocating activity, see Benchmarking (geolocating). For other uses of the term, see Benchmark. Benchmarking is the process of comparing the business processes and performance metrics including cost, cycle time, productivity, or quality to another that is widely considered to be an industry standard benchmark or best practice. EssentiallyRead MoreHarley Davidson Supply Chain Management2054 Words   |  9 Pagesmarket of heavy weight motorcycles. The company’s corporate partner AMF wanted to take advantage of this situation and thus increased the production rate of cycles. Corporate parent AMF only focused mostly on short term return hence quantity and not quality at the time, due to which there was drop in sales and the company’s reputation was shattered with little chance of recovering. H-D then soon went public, but the chairman himself regained the company with a new local management in place it made aRead MoreDoc, Docx, Pdf, Wps, Rtf, Odt6285 Words   |  26 PagesLecturer Department of BBA Stamford University Bangladesh Madam, We are very glad to inform you that we are going to submit the study report titled Management Practices in Business Organizations based on the management practices in Taj King Industries (Pvt.) Ltd a reputed melamine wares manufacturer amp; exporter In this study report, we have tried to include all the factors we thought essential for previously mentioned title. We have analyzed the factors based on managerial theories amp;Read MoreQdc1 Study Guide3259 Words   |  14 PagesGuide QDC1 Study Questions Quality Management: Ch. 9-10, Operations Management Click for Skillsoft Module: The Who, What and Why of ISO 9000:2000 Click for Skillsoft Module: Six Sigma: Reducing Variation to Improve Quality List the types of graphical charts used in operations management. Flowchart, Check Sheet, Histogram, Pareto Chart, scatter diagrams, control charts, run charts, cause and effect diagrams Which charts are important in statistical process control (SPC)? Control Charts Describe the usesRead MoreManagemant Practice Spl5103 Words   |  21 Pages[pic] Executive Summary Pharmaceutical industry is one of the largest industries in our country. Every year a huge amount foreign currency comes from this sector. Square Pharmaceuticals Ltd., the flagship company, is holding the strong leadership position in the pharmaceutical industry of Bangladesh since 1985 and is now on its way to becoming a high performance global player. It was established in 1958 and converted into a public limited company in 1991. The sales turnover of SPL was

The Needs and Satisfaction Levels of International Tourists, How Touri Research Proposal

Essays on The Needs and Satisfaction Levels of International Tourists, How Tourists Resources Are Aligned to Meet the Changing Needs of Tourists Research Proposal The paper â€Å"The Needs and Satisfaction Levels of International Tourists, How Tourists’ Resources Are Aligned to Meet the Changing Needs of Tourists" is an engrossing example of a research proposal on tourism. This proposal provides background information compelling the implementation of this study. It also provides a management decision problems and research problems (Miller, Vandome, and McBrewster, 2009). The proposal also provides a detailed research design for this study by providing the type of research to be undertaken, the type of information to be collected, the recommended method of data collection, sampling techniques, and plan of data analysis (Bramwell and Lane, 2011). The report then provides a conclusion and recommendations for the study.There are various tourist attractions features in Canberra. One of these features is the Australian war memorial, which was built in 1925 that commemorates the war dead of Australia (Breakey, Ding, and Lee, 2008). Another fe ature is the national gallery of Australia which has a wide range of Australia’s art collection. The new parliament house is another key tourist attraction feature in Canberra. Tourists are also attracted to the Australia national film and sound archive which is situated in the Art Deco building that was established in 1930. The Australia academy of science is also a source of tourist attraction in Canberra (Buhalis and Darcy, 2010). Australian national botanic garden that contains many species of flora found in Australia is also a tourist attraction for tourists. The Australian national university is also a tourist attraction point mainly due to its beautiful grounds. Other main tourists’ attraction features in Canberra include Lake Burley Griffin, National Carillon, National Library of Australia, National Zoo and Aquarium, Black Mountain, Canberra Explorer bus, Canberra theatre center, civic square, and Commonwealth Park. In addition, others are Canberra Thespis stat ue, Deakin, Forrest, general post office, London circuit, old parliament house, Parkes, Parliament triangle, Reid, Royal Australian mint, Russel, Serbian orthodox church, St. John’s Church, St Kilda Carousel and Yarralumla (Australia, 2011). Tourists are also attracted to Canberra due to its surroundings such as snowy mountains, Lanyon Homestead, Mount Stromlo observatory, Tidbinbilla and Namadgi national park.BackgroundThe purpose of this study is to elucidate the needs, wants and satisfaction levels among international tourists visiting Canberra, Australia (Buckley, 2011). Tourism is one of the major contributors to the Canberra economy and Australia as a whole. The changing needs of tourists call for establishing their needs and wants in order to be able to satisfy them (Miller, Vandome, and McBrewster, 2009). Studies have indicated that the satisfaction of tourists is under the influence of several situational variables such as social settings, resource settings, and mana gement settings. It has also been established that based on the tourist’s socioeconomic and cultural characteristics in addition to their norms, experiences, preferences, and attitudes, they evaluate tourists’ attraction features subjectively (Australia, 2011). Australia has been experiencing dwindling number of international tourists since 1995 and as such, there is need to establish the needs, wants and satisfaction levels of those who visit Canberra in order to inform the management on how to improve on this and increase the number of international visitors to the region (Bramwell and Lane, 2011). Thus, the main object of this proposal is to devise ways of conducting a study that will help in informing the management of the needs, wants and satisfaction levels of tourists in Canberra (O’Neill, Riscinto-Kozub, Hyfte, 2010). This will, in turn, help the management to offer the much-needed direction on how to tailor the available resources in order to meet the n eeds and wants of tourists and at the same time increase the satisfaction levels. By doing so, the management will be able to reverse the declining trend of international visitors to Australia.

World climate change Free Essays

Introduction The ambiance and interact with each other, the Earth changes the orbit, volcanic eruptions and the energy received from Sun alterations – these are consequences of the universe clime alteration. Over 100 yeas ago, people had begun firing coal, gas and oil, which lead to climate alteration and causation nursery consequence and planetary heating. As a consequence of the human activities the emanation of nursery gases, such as C dioxide, azotic oxide and methane, influence on planetary heating and leads to atmosphere that known as â€Å"greenhouse effect† . We will write a custom essay sample on World climate change or any similar topic only for you Order Now Merely because of combustion of fossil fuels, every twelvemonth over 30 billion metric tons of C dioxide go oning emitted to atmosphere and even 7 billion metric tons to boot go oning to breathe by deforestation activities. Increasing concentration of C dioxide in the ambiance can increase planetary temperature to 7A °C and influence on the planetary biggest ecosystems to resistless recession. For comparing, increasing temperature to 2A °C can take to disappearance of 20 – 30 % of species. The nursery gases – azotic oxide and methane are increasing by human activities as good and have less powerful nursery consequence than C dioxide. Methane produces on topographic points such as landfill sites, favored bogs and besides in the backbones of domestic animate beings. Amount of azotic oxide is increasing by N fertilizers being used in agribusiness. During the last 20 – 30 old ages the Arctic has been heating twice than remainder of the universe. Land – ice and snow screen is decreased, during this period, which effects the land heats faster than sea. This heating leads to conditions that Northern Hemisphere is warming more than Southern. In fact, sea degree is rises, because of ice thaws, when warming clime cause that H2O from melted glaciers flows into the oceans ; and thermic enlargement – when warming clime leads to warming H2O in ocean, which is cause sea degree rise. The Kyoto understanding In 11 December 1997 in Kyoto, Japan was adopted and in 2005 entered into force the Kyoto understanding – international understanding – Convention on Climate Change. In the Kyoto understanding set marks for 37 industrialized states and the European community to cut down nursery gas emanation. Harmonizing to the Kyoto understanding, the states should accomplish marks through national steps and offers three market based mechanisms for it ; emanation trading, clean development mechanism and joint execution. Emission trading or the C market is administrative control of emanation. All parties of the protocol accepted mark to restrict or cut down emanation. Just because of C dioxide chiefly is the chief nursery gas, that ‘s why C now traded like other merchandises. The clean development mechanism allows to a state with emanation decrease or restriction committedness to work on emanation decrease undertakings in developing states. Joint execution allows to a state with emission restriction or decrease committedness from emanation decrease or remotion undertakings to gain emanation decrease units. Harmonizing to the protocol, emanations of states have to be monitored and all these records should be kept. The chief aim of the Kyoto protocol is to cut down corporate emanation of nursery gases by 5 % in comparing with twelvemonth 1990. The emanation mark for each state should be achieved by 2008 – 2012 old ages. The Kyoto protocol is the first measure in planetary decrease of emanation and stabilizing of nursery gases. The causes and effects of clime alteration There are exist two classs of clime alteration causes: natural and human-made. Presents, scientists in the universe concerned about clime alteration are speed up because of human activities. Natural clime alteration causes. Climate on the Earth changed through influence by natural causes like orbital alterations of the Earth, volcanic eruptions, solar fluctuations, ocean current etc. Volcano eruptions lead to elimination of sulfur dioxide, dust, ash and H2O vapor to the ambiance, which is influence the clime by increasing planetal coefficient of reflection that causes atmospheric chilling. The chief constituent of clime is the oceans. Huge sum of heat moves across the Earth by ocean currents. The sea surface pushes horizontally by air current. Deep ocean H2O moves in way from the poles to the equator and motion of warm H2O back from equator to the poles. The poles would be colder and equator warmer without this H2O circulation. The atmospheric concentration of CO2 determines by the ocean H2O circulation. Changes of the Earth orbit: The tilt alterations of the Earth may take to little but of import clime alterations ; more jousts leads to warmer summers and colder winters and less jousts leads to colder summer and heater winter. This sort of little clime alterations thereby produce ice ages. Solar fluctuations: Small alterations in solar system can take to climate alterations. Scientific surveies demonstrate that clime alterations occurred in the past by solar fluctuations. For illustration, the Little ice age between 1650 – 1850 triggered by solar activity decreasing. However, solar fluctuations can non do planetary heating. Measurements, which were done in the early 1980-s showed that the entire sum of solar energy making the planet decreased of 0,1 % in the period merely over 18 months. Some of scientists tried to happen nexus between clime alteration and maculas. Sunspots are magnetic storms, which are seen dark countries on Sun. However, scientific researches showed that maculas prevented energy of the Sun from go forthing its surface. Human causes of clime alteration. Scientific grounds of the Intergovernmental Panel on Climate Change ( IPCC ) shows that human activities lead to climate alteration and influence on planetary clime. The chief ground of human activities that lead to climate alteration is the combustion of fossil fuels ( oil, coal and gas ) and deforestation. Fossil fuels like oil, gas and coal are resources of energy to bring forth electricity, run vehicles and as a consequence of it the big sum of C dioxide, methane and azotic oxide have been emitted to the ambiance. The chief causes of clime alteration in the UK are: 4 % C emanations from industries ; 7 % from agribusiness ; 21 % from conveyance ; 65 % from energy generate procedure by the use of fuel. The beginnings with the biggest sum of emanation are conveyance, air travel and use of energy in families. Harmonizing to the IPCC, the three chief causes of the nursery gases addition are land usage, fossil fuels and agribusiness. Agriculture has important influence on clime alteration by production and release nursery gases. Agriculture cause clime alteration by alarming land screen of the Earth, which leads to act upon on ability to absorb and reflect the heat and visible radiation. The combustion of fossil fuels, deforestation and desertification are the chief beginnings of C dioxide emanation. Deforestation leads to construct up more CO2 in the ambiance. We know that trees absorb CO2. Cuting down rainforest leads to increasing CO2 in the ambiance by 17 % . The recent study of the IPCC says that temperature on the Earth in the period of from 1906 to 2005 has increased by 0.74A °C and temperature are continue to increase. The mean temperature of the Earth is 14 A °C. In instance of natural nurseries consequence did n’t be, the mean temperature would be minus 19A °C. A assortment of gases causes greenhouse consequence. The important part for it makes H2O bluess. CO2 – followed by H2O bluess, causes the content of nursery gases in the ambiance. Current concentration of CO2 in the ambiance is 385 ppm. Before of the industrialization, it was – 280 ppm. Air analysis from ice cap of the Antarctic showed that air contained CO2 more than remainder of gases and than in the all period of 650000 old ages. Consequence of clime alteration Nowadays people can detect effects of planetary clime alteration on ambiance, human wellness, agribusiness, economic etc. Ice on lakes and rivers interrupting up earlier, glaciers have been shrunk, trees blooming earlier, some types of animate beings and workss are shifted. Climate alteration effects were predicted by scientists in the yesteryear, which is go oning: sea degree rises faster and longer, sea ice is loss, more intense heat moving ridges. Scientists rather confident about lifting planetary temperatures for decennaries, which have been caused by nursery gases from human – made activities. Harmonizing to the IPCC, clime alteration consequence will be vary in some parts over clip, which is depend on the abilities of environmental and societal systems for version and extenuation for alterations. IPCC says that lifting of planetary temperature by 1-3A °C in comparing with 1990 will consequence beneficially on some parts and detrimentally on others. These conditions will consequence economic state of affairs of states as good. Some of planetary clime alteration impacts on parts are following: Europe Risk of inland inundations are increasing, coastal implosion therapy and eroding from inundations are increasing and sea degree is lifting, snow screen and winter touristry is reduced, glaciers in mountain country is retreats, harvest productiveness decrease in southern Europe Asia In south, east, sou’-east and cardinal Asia predicted decreasing of fresh H2O by the 2050, coastal countries under increasing hazard of implosion therapy, therefore decease rate from inundations and drouths can be increased in some parts. Africa Water emphasis traveling to be increased by 2020, outputs from rain-fed agribusiness in some parts can be reduced by up to 50 % by 2020, badly impact can be on agribusiness production. North America In the western mountains of North America snowpack is diminishing and therefore, outputs of rain-fed agribusiness of some parts is increasing, strength, continuance and frequence oh heat moving ridges is increasing in metropoliss South America In eastern Arizona tropical woods replacing bit by bit by Savannah, in some tropical countries species extinction leads to the important hazard of biodiversity loss, impact on agribusiness, H2O handiness and energy coevals. Skeptics and lobbyist about clime alteration Having talked about clime alteration the most likely to run into skeptics, who denies climate alteration effects by seeing confederacy of grant – hungry broad scientists, or rely on viing theories, or see climate alteration as misrepresentation from authorities. All brief information on causes and effects of planetary clime alteration shows important hazard for the full universe in all facets of life. Harmonizing to Pew Global Attitudes Survey 2006, 47 % of Americans 37 % Chinese people do n’t concern about clime alteration job. These states is the chief manufacturers of nursery gases and non responsible on C, which goes up to the ambiance and effects the full universe. The Competitive Enterprise Institute ( CEI ) , which supported financially by such companies as Amoco, Ford Motor Co, Exxon Mobile, Texaco etc, supply information to skeptics. Harmonizing to the CEI, if there are topographic point for scientific argument on clime alteration its agencies that there are no n scientific consensus about planetary clime alteration. Aims of the Kyoto understanding awaken â€Å"deep pocket† and are non good for such large industries. Skeptics says that alliance financed by big corporations and trade groups from oil, coal, car industries and budget of the Kyoto protocol in 1997 was $ 1,68mln. During 1990s alliance conducted million dollar advertisement runs, politicians and scientists were debating on how people perilously heat the planet. Presents, their arguments changed on how to respond on lifting temperature. How to cite World climate change, Essay examples

Mary Oliver Rhetorical Analysis Essay free essay sample

The excerpt from Mary Oliver’s â€Å"Building the House† serves as a way to describe what happens during the poetry writing process. Although Mary Oliver believes that writing poetry is hard work, she uses extended metaphor, juxtaposition, and point of view to describe the writing process in comparison of building a house, which shows that Oliver sees poetry as something that involves mental labor which is a different challenge than physical labor . Through the use of extended metaphor, Mary Oliver is allowed to express both the mentality and physicality when writing a poem, which is able to show the differences and similarities by comparison. The extended metaphor works to compare the process of writing poetry to that of building a house, as seen firstly with the title, â€Å"Building the House. † Adding on, Oliver says, â€Å" a stiffness of the fingers, a refusal of the eyes to follow the aim of the hammer toward the nail head † Through this extended metaphor, Oliver is attempting to show that like construction of houses and writing poetry, there is a lot of labor whether it’s physical or mental is involved. We will write a custom essay sample on Mary Oliver Rhetorical Analysis Essay or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page By comparing these two unlike things, it is seen that although they are different tasks, they share the same difficulty. She continues by contrasting how a poet only sits and â€Å"scribbles some words upon the page† and how the construction worker or architect is more of a labor because he/she â€Å"draws and measures. † This goes to show that what she lacked in her job as a poet was physical motion, yet it is a hard task for her, as is attempting to carefully nail an object to another. Mary Oliver uses juxtaposition to draw attention to the differences and similarities of writing poems and other types of work or labor to bring attention to how different tasks have different challenges just as do poems. â€Å"The dance dances, the painter dips and lifts and lays on the oils; the composer reaches at least across the octaves † The juxtaposition of how different workers work shows emphasizes Mary’s ideas that the mental labor of writing a poem is a different challenge than that of physical labor, yet it is seen in may different works and in different ways. She continues on by saying, â€Å"The poet sits, or, if it is a fluid moment, he scribbles some words up on the page. † This goes to show that although writing poetry does not involve the type of labor that building a house would do, it involves concentration and time, which is another challenge in the poet’s process. She uses this juxtaposition is used effectively by Mary Oliver to show how poetry writing also has it’s hardships and challenges and also shows that there are differences between different types of labor involved with different types of work. Furthermore, Mary Oliver’s use of first-person point of view allows her to show how poetry writing is personal to her, and how it serves a specific type of challenge. Mary Oliver starts off her writing with the word â€Å"I,† and continues on by referring to herself as first-person. This continuous point of view allows her to create a relationship with the reader where the writing’s purpose is not merely just to educate or inform. When she says, â€Å"I understand his pleasure† when talking about a carpenter that she knew, she makes her previous anecdote personal to her. Adding on, she says, â€Å" motion kept my body happy while I scribbled,† towards the end of the excerpt. This use of first person allows her to bring light to her willingness to be in motion and work extremely hard, whether it is mentally or physically to write. Overall, her first-person point of view emphasizes the fact that the challenges faced by writing poetry, are personal to herself, and that is why she finds it to compelling. Mary Oliver uses many comparisons and contrasts to explain her mentality of writing poetry. Through the compare and contrast, the reader is able to see that not only can the building of a house be a metaphor to the writing process, but also to any other work that has challenges. This personal-narrative involving the description of a process and work, shows that Mary Oliver does see a lot of challenges when writing poetry, however, it is very different from other hardships because poetry is personal to her.

Informative Speech Evolution of Video Games free essay sample

Do you wish you could escape the world sometimes? Free your mind of all thoughts on reality and just get away. Well lucky for you, there is one way you can do this. It’s been around since the 1970s and it’s the wonderful world of video games. Ever since then technology has grown incredibly now making a fun hobby out of it that people can really enjoy. I myself have made it a hobby and try to keep up with all the latest devolvement’s in the gaming world. Some of my fondest memories are from when I was about 4 years old and I would wake up and go play Mario with my grandpa on my old Nintendo 64. Today I’m going to explain the past of video gaming, where we are today and what is to come of the video games in the future so you can create a sense of appreciation and maybe make it a hobby for yourself. We will write a custom essay sample on Informative Speech Evolution of Video Games or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page I will start with how video games got started and how they have advanced over the past years. The evolution of video games has been an amazing journey. Transition-First we will start off video games created between 1970 and 2000. FIRST MAIN POINT We have come a long way since video games first became popular in the 1970s. Arcade Games kick started the revolution making it hard not to find one of these anywhere you went, Development for home video game consoles began. In 1975 Atari released home pong which became a smash hit and brought massive attention to the gaming industry. Other companies like Mattel and Intellivision tried to compete and came up with their own style of home consoles, but once Atari released Atari 2600 with a game called â€Å"space invaders†, it dominated the market. Now introducing the 1980s or â€Å"The Golden Age of Video Gaming. It is in this era that Nintendo came out with the first Mario brothers game and Sega released the Sega genesis. It was a ground-breaking time for video games, making them more popular than ever. The 1990s became even more advanced. From 1990 to 1998 Sonic the Hedgehog became popular, Super Nintendo, the Sega Dreamcast, PlayStation and Nintendo 64 were all released. Mo ving forward video games have now met amazing heights. SECOND MAIN POINT Transition- Next we will talk about current consoles and how they differ from  their previous models. Consoles like the Xbox 360 and PS3 allow you to play game online through an internet connection so you can talk and play with people all over the world. Attachments like Xbox’s Kinect and PlayStation’s Move that will actually sense your body and act as the controller. Handheld games like the Nintendo DS and Sony’s PSP have devolved greatly and now offer touchscreens with hi-definition gaming all in the palm of your hand. Gearlog , a writer on Geek.com said Nintendo revolutionized hand-held gaming when it incorporated a second screen impacting mechanic for how future games would be developed. Computer gaming has also reached amazing levels. Games like World of Warcraft or virtual worlds like Second Life are never endings and allow a person to build up their character as long as they please., never reaching a final level or an ending point. Transition- Next we will talk about current consoles and how they differ from their previous models. THIRD MAIN POINT Looking to the future of the world of video games is only going to get better. The development of handheld consoles like the for mentioned DS and PSP are also going to be capable of playing online though any Wi-Fi or 4G connection allowing the player to interact with people all over the world on-the-go. Now virtual retinal display might just be the revolutionary way to end the making of the consoles altogether. Michael Anissimov said on wisepeek.com that a virtual retinal display is a head mounted display system that projects an image directly on the human retina with low energy lasers or LCD. Virtual Reality devices are also making a comeback and will be more used in the future. The Oculus Rift is a prototype head mounted virtual reality display that can feature 3D quality gameplay. According to Michael Poh of Hongkiat.com he has seen the evolution of video games in terms of its graphical quality, so much so that one would have difficulty differentiating a video game from a real-lif e scene today. Transition- As you can see the evolution of video games has been astonishing, CONCLUSION They have come a long way since the first Atari was released, introducing us to the industry of gaming. With today’s technology and advancements, playing video games is more fun than ever. It is a good hobby to have to get your mind off of reality and dive into some adventure. Furthermore even  beginning to think about how the gaming industry will be changing in the future is mind blowing. Unprescendented things are going to happen for the gaming world, there is no doubt that video games will continue to get better year after year. After hearing about the impressive growth of video games, I hope I have your mind wandering. For gamers like me, playing is an escape, an adventure the real world cannot give us. For those of us who can’t ski down the steepest slope, fight off a zombie invasion, or play in the NFL. Video games give us a chance to experience these kinds of things for ourselves. You won’t want to miss out on how our gaming technology will be changing i n the future. It is definitely one of the most captivating industries in the whole world.

How to Resolve and Solve Problems

How to Resolve and Solve Problems A great skill to have is the ability to solve problems specifically interpersonal and behavioral problems,   effectively. At the same time it is also a great skill to teach students. There are a few key requirements to resolving problems collaboratively.   Both inside and outside the classroom teachers deal with problems, and knowing how to resolve problems, either conflict between students, with students or with parents, require following some steps.   Here are the steps to becoming an more effective problem solver. Heres How: Understand why the problem exists. What is the actual root cause for the problem? If you know something about why the problem exists, youll have a better time of resolving the problem. Lets take the example of a child who doesnt want to come to school. Before you can help identify a solution, it is important to find out why the child doesnt want to come to school. Perhaps bullying is occurring on the bus or in the halls. One of the first steps to effectively solve problems, is delving into the root cause of the problem.Be able to clearly identify the problem and the obstacles that the problem presents. All too often when attempting to address a problem, those problems surrounding the principal cause are considered rather than identifying and resolving the root problem.   Clearly state the problem and what obstacles the problem presents to you. Again, the child who doesnt want to come to school has the problem of it having a negative impact on his/her academic success.Once you have clearly stated the problem, you need to understand what you have control over and what you dont. Your efforts to resolve the problem must be within the areas where you have control. You may not have control whether a child comes to school, but you do have control over dealing with the bully who is creating the barrier to the child not wanting to attend school. Solving problems must focus on the things which you can control. Do you have all the information you need? Solving problems is often like becoming involved in investigations. Have you thoroughly researched why the problem exists? Do you have all the information you need? If not, be persistent and seek out all information before tackling the problem.Dont jump to conclusions. Once you have all of your information, analyze it carefully and look at it from various viewpoints. Be as objective as possible and dont be quick to judge. Remain judgement free as much as possible. This is a time for you to use your critical thinking skills.Now determine your options for solutions. How many options do you have? Are you sure? Which options seem reasonable? Have you weighed the pros and cons of your options? Are there any limitations to your options? Are some options better than others and why? Are there advantages and disadvantages you need to take into consideration?You should now be ready to act. A well thought out strategy/solution is now in place. However, what is your plan to monitor its outcome? How will you know that your solution is working? Once your solution is in place, it is important to monitor and evaulate the outcome regularly. In SummaryYou can use this approach to many of the challenges that arise in your classroom. A child who wont comply, a parent who is unhappy with their childs IEP, an educational assistant with whom you are having some conflict with. The strategies used in this problem solving plan are merely good life long skills to have. Tips: Clearly state the problem.Know what the obstacles are related to the problem.Determine what you have control over and what you dont.Make sure you have ALL the information you need.Identify all of your options and implement the best option for a solution.

Charles darwin Essay Example | Topics and Well Written Essays - 1250 words - 2

Charles darwin - Essay Example This governmental body has set safety standards which are to be followed by all the companies and the safety and health professionals have to ensure that these standards are being followed and obeyed by every company. The article â€Å"Importance of safety consideration in site layout and organization† is written by Anumba and Bishop. The article was published in the Canadian Journal of Civil Engineering in the year 1997. The article discusses the facts that generally at the time of laying out the site plan are ignored and it has been mentioned that these facts are very important to be considered in the practical implementation. It has been discussed that in general no company focusses much on safety methods that must be adopted. Here it has been mentioned that occupational safety and health professionals must keep a proper check on such companies and proper action must be taken against such companies (Anumba & Bishop, 1997). Safety and health professionals are responsible for planning out and formulating the rules and standards that are to be set for the employees. They have to first plan out a team of highly professional and experienced professionals which would work together as a team to formulate the points and rules and finalize them, then a team must be developed which would ensure that the rules and standards set by the agency are being implemented or not. While planning and formulating the rules it must be made sure that the rules that are being designed must be practically applicable and can be applied to all organizations and firms (Bailey, 2008). Each and every aspect regarding health care issues must be kept under consideration and all sorts of companies and firms must be kept in view while designing the rules and points of the act. It is the responsibility and duty of the health and safety professionals to design such rules and set such standards that each and every employee feels safe and secure while working in the workplace environment. Safety

Continental Drift Theory Essay Example | Topics and Well Written Essays - 750 words

Continental Drift Theory - Essay Example In the last part of the 20th century, modern investigations have led to the evidence of sea-floor spreading or the diversion of ocean floor from the mod-ocean ridges. Under geometric continental reconstructions evidence, Wegener proposed that the coastline geography of the continents on either side of the Atlantic Ocean have pattern and can be fitted back together like a jigsaw puzzle. Example of which are the coastlines of western Africa and eastern South America (Rogers, 2008, 93). In addition, Wegener reiterated it is the end of the submerged continental shelf that marks the line of the originally-joined continents and not the coastline-fit misconception. Geological match and continuity of structure evidence explained how there are similar rock types, succession of strata or igneous bodies which have unique characteristics were found on either side of the ocean. This evidence was observed in the similarities of the rock strata and geological structures of the Appalachian and Caled onian mountain belts of eastern USA and northwestern Europe, as well as the Precambrian rocks and geological structures similarity observed between South America and Africa (Rogers, 2008, 95). ... The modern evidence gathered during the latter part of the 20th century which has made the continental drift theory acceptable is the sea-floor spreading evidence. Modern geologists had explained the inaccessible ocean floor in Wegener’s theory and discovered striped patterns of magnetic polarities at both sides of the ocean and on mid-ocean ridges (Frisch, Meschede & Blakey, 2011, 3). Scientists and physicists during Wegener’s time rejected his idea because the forces suggested by Wegener are too weak to explain the drift of the continents. Furthermore, the lack of strong mechanism to drive continents across the ocean basins’ questioned the credibility of the Wegener’s continental drift theory, particularly the use of scientific method. During that time, Americans believed that scientific method is empirical, inductive, modest, holding close to the object of study, and is resistant to the impulse of going further (Oreskes, 2003, 11). Derived from the form er description, Americans believed that Wegener breached the scientific method because of drawing out the theory first before gathering evidence. Scientist of today accepted Wegener’s theory but used plates instead to describe the division and pattern of relative movement between regions of the Earth surface because modern physicists discovered the sea-floor spreading and the tectonic cycle (Frisch, Meschede & Blakey, 2011, 3). In addition, the process of scientific method and theory development are further improved. The scientific method starts with a question of the object/topic under investigation. Hypothesis is identified and initial experiment is done. Observation and measurement of the initial experiment took

Peaceful coexistence within society Essay Example | Topics and Well Written Essays - 500 words

Peaceful coexistence within society - Essay Example This is because conflict and violence have resulted in the immigration of business investors, development experts as well as a massive number of their population who could have participated in developing their nation. Conflict between neighbors or countries may also result to loss of lives especially of innocent skilled people who may promote the rapid economic development of a nation (Council of International Relations 2008, n.p) There are various policies that have been formulated and implemented by different stakeholders to ensure that there is a peaceful co-existence within the society for instance; famous presidents like Franklyn D. Roosevelt advocated for peaceful co-existence between nations, an action which saved the world from a large extent of barbarism. Currently, various peace policies have been implemented to ensure that societies and nations live peacefully, for example, the UN Peace Building Commission that was developed in 2005 which has thirty-one member state and it is geared towards promoting peace between the member state nations through the development and monitoring of peacebuilding activities.Hard work in every development activity is the pathway that leads individuals from poverty; it is imperative for everybody aspiring to be successful to commit himself/herself in all activity he/she conducts. The fruits of hard work are also important in reducing immoral activities among the society such as robbery and violence that are generally conducted by idle people.

How The Modern Police Force Has Developed Criminology Essay

How The Modern Police Force Has Developed Criminology Essay This assignment looks at how the modern police force has developed since it was first formed as the Metropolitan Police force and how it has developed to and expanded. Also how the public perceives the police and what they expect from them. In the early 19th century there was very little organisation in the police force, but as London expanded and the population increased the law and order needed to be maintained. Crime and policy came under investigation and in 1828 Sir Robert Peel organised a committee that provided evidence for his new police bill which is the main thing that led to the police force in London becoming organised. The metropolitan police was first organised in 1829 by Sir Robert Peel and Sir Charles Rowan and Richard Mayne are appointed as Justices of the peace who are in charge of the police force. In 1834 the select committee who inquire into how well the police are working within the metropolis area reported that that the metropolitan police force, as respects its influence in repressing crime and the security it has given to persons and property, is one of the most valuable modern institution. In 1836 the metropolitan police take the bow street horse patrol into its ranks. The select committee the n look into affairs of police officers and recommend that the City of London police should be put under the control of the metropolitan police force. In 1838 the select committee recommends that the marine police section and the bow street runners, who were the first organised and paid police force, and the bow street office is also to be disbanded. All of these recommendations came into effect in this year. The dockyard division of the metropolitan police is formed in 1841 and in 42 the detective department is formed. By 1845 the commissioners aim to have one police officer to every 450 people in the population. By the end of the 1840s there was a large scale enrolment into the special constabulary to help the metropolitan police deal with the chartist demonstrations, the strength of the metropolitan police was 5,288 who were able to perform duty and the population of London at the time was 2,473,758. The black marias were used to move prisoners in 1857. In 1862 there was further r ecruitment into the metropolitan police and the X and Y divisions were formed in west London and Y division in the north and later on they patrolled north east London. The standard height is raised to 5ft 8ins except for the dockyard division which is 5ft 7ins. The police strike for the first time in 1872. The police offices at Great Scotland yard are taken into possession on the 4th October 1875 by the detective department. In 1879 Initial rules for dealing with Murder cases, released on 7 June, stated the body must not be moved, nor anything about it or in the room or place interfered with, and the public must be excluded.. there were 13,319 officers in the metropolitan police force by 1885 for a population 5,255,069. The new headquarters are opened at New Scotland Yard in 1890. In 1895 there were certain qualifications that had to be met to join the police which were they had to be over 21 and under 27 when they joined, they also had to be 5ft 9ins tall without shoes, they also h ave to be able to read well and have readable writing, have a reasonable level of intelligence and be in good health. In the last year of the 19th century the metropolitan police force had risen to 16,000 officers to police 7 million people. The finger print bureau started operations in 1901.when the First World War starts in 1914 24,000 special constables were recruited and by the end of the year there were 31,000 and women were also first recruited in this year to police the women who had taken over most of the jobs the men had done. By the end of the First World War there was another strike for more pay and better conditions and recognition of the union. Women started patrolling in 1919 and the flying squad was formed. The police box system was started on an experimental basis. The metropolitan police forensic laboratory is opened in 1935. The 999 system was introduced in 37. In the 60s the police started using vehicles more instead of foot patrols in the form of the panda car. T he headquarters are moved, in 1967, from the Norman Shaw building to Broadway but keeps the name New Scotland Yard. In 1980 the metropolitan Air Support Unit was first formed. In 1997 the National Automated Fingerprint Identification System was installed (N.A.F.I.S). The requirements to join the police has changed drastically since they first came in in 1895. There are no academic requirements, it is open to graduates and non graduates where as before officers had to have good level of reading and writing but because the education system has developed since the 19th century and everyone has to go to school that isnt usually a problem. There is no longer a height requirement for recruits especially know as there are no restrictions on sex or ethnic background to join the police. the age requirement is very broad now as it is 18 and a half -55 years old, where as before it was between 21 and 27 to join. Applicants still have to be reasonably fit and healthy but now have to go through several fitness tests. The entry requirements to join the police now are now more general as it is open to anyone. Police communications started when the telephone was first invented, police phones and boxes were set up in the cities so that police could check in and report crimes. The police boxes were replaced with the police band radio came in several configuration, some had multiple channels, the radio was usually mounted in a panda car and was used to inform and update other officers on patrol. The radio has developed further into the radio system that is used today which is the airwave radio. The airwave radio is a digital and has replaced the analogue radio. There are many benefits of the airwaves radio some of which are there is improved coverage and speech clarity, also improved security and encryptions of communications, national roaming, scope for mobile data applications and improved ability for inter operational communications between the police and other emergency services. The police needed a new radio system because the old one had become out of date and the digital technology pro vides much better coverage and clearer signals. The TETRA technology covers more of the country so there are fewer gaps in the coverage, TETRA can also cope with major incidents when there are going to be many radios being used at the same time without overloading the network. During the Brixton riots the police were not equipped properly to deal with the situation and not only did many officers get injured but they were also forced to use bin lids for protection. The riot gear has since improved and the padded protection covers the body, there are proper helmets with face guards and the shield that are designed to with stand the situation of a riot. Sikhs in the police are not allowed to join the fire arms unit because they cant wear a helmet due to their religious requirements which are the 5 ks. The one that is the problem is the Kesh or uncut hair. Having uncut hair is believed to be a symbol of holiness and strength and is also a symbol of their wish to move beyond concerns of the body. British Police Sikh Association calls on Home Office to develop ballistic material to allow members to join firearms units. Sikh police officers want to have bulletproof turbans made so that they can be in the fire arms unit. In Sikhism men are required to wear a turban but because of the current police safety regulations they have to wear a helmet but they dont fit on top of the turbans and their religion states that they are not allowed to remove the turban. A ballistic material is being developed that would provide a degree of protection when worn so that Sikh police officers can be involved in fire arms operations, although there is an au gment that Sikhs dont have to wear crash helmets when they are riding a bike or motorcycle under the motorcycle crash helmets(religious exemption) act 1976. Research has begun to find the right material for making the bulletproof turban but it needs to pass the Home Offices tests before it can be issued to officers. Tens of thousands of pounds has already been spent to try and find a wear that Sikhs can wear but will also provide an adequate amount of protection, this happened when a Sikh officer applied to join the counter-terrorist operational Support Unit. Police community support officer (PCSO), work on the frontline with the local police force, providing a visible and reassuring presence on the streets and tackling the problem of anti-social behaviour. It is a full time, paid job. PCSOs have different roles in different forces, but they usually patrol a beat and interact with the public, while also offering assistance to police officers at crime scenes and major events. Depending on where they work, they can deal with minor offences, offer early intervention to help stop or slow down people who are committing an offence, provide support to police on the front line, conduct house to house enquiries, guard and monitor crime scenes and provide crime prevention advice to the general public. Although PCSOs do not have the same powers as regular police officers, they still carry a lot of responsibility, and are a critical part of the police force. They do not carry any of the equipment that regular police use like cuffs because they havent had the training and they dont have the right to enforce the law. Police community support officer will work to complement and support regular police officers, providing a visible and accessible uniformed presence to improve the quality of life in the community and offer greater public reassurance. Police community support officers have a unique role that is designed purely to tackle local anti-social behaviour and issues affecting other peopels quality of life. Police Forces continue to support community support officers because they areproviding a visible and regular patrol, unlike neighbourhood wardens, they are employed by the police and have some powers provided by an Act of Parliament to allow them to directly tackle some anti-social behaviour issues. The term moral panics are mainly associated with Stan Cohen, who used it in his book Mods and Rockers in the 60s. Cohens sociology was a mixture of American labelling theory and left wing British sociology which concerns youth and social class. Societies are subjected to periods of moral panic, a condition, episode, person or a group of people can be thought of a threat to a societies values and interests, its nature is stereotypically presented by the media. Sometimes the focus of the panic always around but can suddenly appear in the publics eye and can easily pass on and be forgotten but it can also be of a more serious nature and be kept in the front of the publics mind which can cause changes to be made in legal and social policies. One of the most remembered uses of the term was in Jock Youngs article in 1971 when he talked about the public concern about drug use. Thompson (1998) came up with five stages in a moral panic. One is something or someone that is defined as a threat to values or interests. Two is the threat is shown as a recognisable form by the media. Three is there is a quick build up of public concern. Four is that there is a response from the authorities. Five is the panic recedes or there are results in social changes. Conclusion The police have changed over the years to make them more efficient at their job of protecting the publics life and property. Thing like the new finger print system have helped to catch criminal and reduce the amount of crime. Police cars have made the police more mobile and capable of attending incidences quicker and the radio has made police able to communicate with any other officers with in their force and also they can report incidences and accidents quicker which allow other services to respond which saves more lives and makes the general public feel safer and trust the police with their safety. The police community support officers may not be able to enforce the law like regular officers but they can act as a deterrent because they are someone in uniform which criminals and law breakers would be aware of, they also provide reassurance to they public and can give information to other people making them aware of causes of crime and what the police do to stop it from happening. Th e police are making sure that all the forces have more women and ethnic minorities so that they can relate to the smaller communities who could other wise be less inclined to approach police because they might think of them as racist due to allegations that were made during the 1980s so having women and ethnic minorities working in the police gives the whole police force a more approachable look.

The Reproduction of Rabbits :: essays research papers fc

Rabbits are one of the oldest known animals to exist. Rabbits appear in so many places in our history. In fact, these animals are so old that geologists have proved them to date back 30 or 40 million years. Perhaps, the most well known on appearance in history is the legend of the Easter Bunny. This legend is so well known and so well loved by children everywhere, that it is safe to say that the rabbit is a considerably important part of our history. This fact alone proves that the rabbit deserves our attention.   Ã‚  Ã‚  Ã‚  Ã‚  The rabbit is well known throughout the history of mankind. The Romans, at one time, thought that rabbit meat contributed to the beauty of Roman women. Fortunately they were correct. French monks of the middle ages also raised rabbits as meat for food and their fur for their robes. Both of these cultures enjoyed eating the unborn rabbit. Early Norman raiders introduced rabbits to England. Here, they were first caught with rabbits, and then, as rabbit hunting became a sport, they were hunted by ladies with bows and arrows and dogs.   Ã‚  Ã‚  Ã‚  Ã‚  There are also many artifacts in history that include the rabbit. For example, a sphinx in Turkey, built in 1500 B.C., has been standing on the figures of two rabbits for about 3500 years. There are numerous superstitions and legends pertaining to rabbits. The Emperor of the Balearic Islands, Hadarian, appears on coins of that era along with the rabbit. There is no doubt that rabbits are important to our history and deserve our attention.   Ã‚  Ã‚  Ã‚  Ã‚  It is hard to say where the rabbit was originally domesticated because there are so many accounts of this occurrence in so many countries, but it is generally accepted that the Phoenicians (traders from Spain) must receive credit for spreading the domestic rabbit throughout the world. There has also been much debate as to what order the rabbit should belong to. It seems that rabbits have cause much confusion for mankind throughout history.   Ã‚  Ã‚  Ã‚  Ã‚  Rabbits were once placed in the order of Rodentia. However, scientists soon noted that rabbits had many anatomical differences from rodents. The largest and most significant one being tooth structure. Rabbits were then given their own order. This is the order of Lagomorpha. This order is further divided into two smaller groups. They are Leporidae, which is made up of rabbits and hares, and Ochotonidae, containing only the small rock rabbit, the pika.

Mang-Inasal

Mang Inasal Philippines is the Philippine's fastest growing barbeque fast food chain, serving chicken, pork barbeque and other Filipino favorites, was first established on December12,2003 in Iloilo City. It operates quick service. It specializes in chicken inasal an various pinoy products. The company’s menu include pinoy palamigs, pinoy and keso burger, beef singangs, and bangus sinigangs. And they also serve pork barbeque and other Filipino favorites.Mang Inasal, innovation is important because competition in the fast food industry is very tight. Product innovation is a must as it adds value to the company since products are being offered to the market for attention, acquisition orconsumption that may satisfy a need or want. In this case product innovation is done toget the attention of customers and most especially the non-customers of the company sothat they will have a chance to steal some market share of their competitors.As the saying goes, â€Å"the test of the puddin g is in the eating. † It is imperative for Mang Inasal, being in the fast food industry, to offer its customers with good food. They must thenmake sure that the taste, which the customers have grown accustomed, should bemaintained and standardized, to keep the customers hooked and coming back for more. Freshness and quality of ingredients should also be maintained as part of maintaininghigh standards with their products.Pricing also is an important to consider given that thetarget market of Mang Inasal is considered to be price sensitive. Any sudden and drasticchange in price might push the customers to find other food providers. And in theindustry that Mang Inasal is in, there many others than can provide Mang Inasal customers with other alternatives. It must then be ensured that products of Mang Inasal are priced in a way that highlights value at the same time, still affordable to its customers. The improvements and innovation in the product and services must be continuous.

The Problem of Opium in Persia essays

The Problem of Opium in Persia essays The League of Nations has among its many functions, to take over the supervision of international agreements such as the Hague Convention. . At the League's first meeting, an advisory committee on opium and other drugs was set up, with two functions; to collect and analyse information on the drug traffic, and to try to persuade member States to keep the regulations laid down to control it. The information collected, when analysed, revealed that La Motte's strictures had been justified. The Hague Convention was revealed as no more than a string of aspirations. That happend because the League can not have the pretention of creating restraining rules to countries and wait to see how the countries will handle those rules, some nations, for example, had pledged themselves to control the output of raw and prepared opium; but they had been careful not to say how, or when, mostly because they dont have the interest of doing such thing. India believes that opium is something that needs to be regulated, but dont understand what means can be taken to achieve such thing. A fair dabate will be the only way to find answers to this problem, that will not be resolved in the short term. Opium its a important economic factor in countries like China, India and Persia. As we all know, it will be an utopic way of thinking to just abolish opium. We know thats not what the League is proposing but we are afraid that this will be the solution. Besides all of the enconomic and social factors, Indian opium could produce admirable morphine and its decided that we are going to produce much of it to the consumption of the great British Empire and its colonies. Even though India is willing to fight the drug prodution and exportation of the illegal opium. ...

Broken Women in Paradise

Broken Women in Paradise Broken Women in ParadiseToni Morrison's Paradise reveals a portrait of four broken women - Mavis, Grace, Seneca, and Pallas. These women come to the Convent looking for something; however, none of them are aware of what it is they are searching for until it happens to them. All the women have been hurt by their past and they go to the Convent, mostly by accident, looking for help. At the Convent they receive the help they have been looking for, freedom from the past that haunts each woman.The women arrive at the Convent one at a time between 1968 and 1976 and Mavis is the first. Her story begins as she is running away from an abusive husband, dead babies, plotting children, and an intolerant mother. Her husband, Frank, is an alcoholic. He abused and raped her so much she reverted back to a child-like state being unable to care for herself.Mavis StaplesShe was also running away from the recent death of her twin daughters who had suffocated in a car while she was buying food for supper . The twins were not her only children; she also had Sal, Billie James, and Frankie. Mavis was convinced that her children, particularly Sal, were going to attempt to kill her at her husband's orders. At dinner the night after Mavis was interviewed for the paper about her dead twins, Sal has a shaving razor at the table; Mavis was convinced they were going to kill her. "She didn't think it would take them long, and seeing how they were at supper, enjoying each other's jokes and all, she knew Frank would let the children do it." (25). Once Mavis escaped her home and stole her husband's car - which was his pride and joy - she ran to her...

Eugene onegin Essay Example | Topics and Well Written Essays - 500 words

Eugene onegin - Essay Example A dandy, deprived strict moral values and norms, he goes on the booze. Through this character, Pushkin depicts the gap between expected, traditional, usual things and reality people try to escape. He shows that perception of the world was limited by traditions and values imposed by their society. â€Å"Tatyana leaves Onegin kneeling, / looks at him with a steady gaze† (Pushkin). This remark shows that Tatyana is deeply hurt by Onegin who ruins her life and Olga’s happiness. The surface of her story is limpidly clear and beguilingly placid, but Pushkin’s use of it is to enforce by close logic an impossible and often very shocking proposition driven with distinct and startling imagery. Onegin deserves his fate because his desire to possess love of Tatiana is nothing more than dissatisfaction of the past that resulted in losses and hopelessness. On the other hand, I sympathize with this character because love becomes a vein sacrifice that is painful and sorrowful causing terrible sufferings and emotional burden for people. Quite early Onegin explores the meaning and significance of money and social status in life which brings him no good: â€Å"Onegin, my good friend, was littered / and bred upon the Nevas brink’ (Pushkin). On the other hand, Pushkin’s contribution to the pessimism which characterizes so much of the important writing of the ninetieth century was to probe the inner recesses of human behavior to see by what instincts people are governed. Onegin proposes a view of mans essential nature: greedy and rakish. In practice it is possible and desirable to create new law and values, because new environment forces people to change their personal priorities and morals. Social ideology and way of life typical for many young people of his age is the main cause of his suffering and fate. â€Å"Onegin swiftl y came to know / his tale of youthful love, narrated / with deep emotion through and through, / to us, though,

Three Main Concepts Of Leisure Essay Example | Topics and Well Written Essays - 1250 words - 1

Three Main Concepts Of Leisure - Essay Example The past experiences, leisure have been defined as the free time or something that one wants to do freely. Others define it as relaxing and spare time or time for doing nothing. The approach is different from the considered diverse because the definition of the term is not static but dynamic. Therefore, the first concept of the leisure is defined as time. In this definition, leisure is defined as the time that allows an individual to have greater freedom. For instance, if the work schedules offer time off, the time that one has to do his own stuff can be considered leisure. However, the definition of free time is challenging based on the concept of free. Freedom is a factor that is defined by the culture and the nature of the society. For working class, it may be considered as the off time given by the company or the organization. However, the case becomes complex if looking at the retired persons because the definition changes completely because the available time increases thus mak ing the situation complex when looking at leisure as a time-based subject. Leisure can also be defined as the activity which is considered as leisurely. The Greek definition of leisure is a serious activity without pressure. It means that the activity is not done as a compulsory subject but is defined done by one’s personal appeal. While addressing the challenge of leisure as an activity, it is evident that all the activities done cannot be classified as leisure with some considering playing softball as leisure. While activity as leisure offers an absurd ideology, others consider leisure as the stat of existence or mind which can be addressed differently and handled based on the mood contemplation. The difference of ideologies are different but do not address the challenge of definition differences. The challenge of the word is the diverse nature of the activities and states associated leisure.

Affluenza Essay Example | Topics and Well Written Essays - 1000 words

Affluenza - Essay Example Therefore, this is an apparent indication that the problem of affluenza has a rich history in human life. Greed is a major constituent of Affluenza, since individuals persistently possess a materialistic mindset. However, the exaggerated possessions initiate negative ramifications in society. it amounts to health hazards, economic stagnation, environmental pollution, amongst others. Evidently, this is an ancient social problem that requires remedies. Johnson is an anthropologist who conducted a study in a hunting and gathering society called Machiguenga. According to his findings, the society enjoys more merit than the modernized society. The people of this society practice subsistence, and they are content with the resources that are at their disposal. They are never in a hurry, and they are much cohesive in their inter-personal relationships. Different philosophers such as Aristotle, Jesus Christ, Jerome Segal, amongst others assert that more possessions bring more struggles than h aving enough. Affluenza definitely brings much decadence to the society. Affluenza is a persistent social problem that has four major solutions.... Excessive consumption is a key mannerism that manifests amongst the affluent individuals. Academic adjustments in schools would offer profound recommendations against affluenza. Consequently, children will achieve awareness about the ramifications of affluenza. The knowledge system would also inculcate a change in parent’s lifestyle. Parents would not have to invest immensely on snacks and soft drinks. Therefore, the parents’ culture of overconsumption would take a diminishing trend. Evidently, the curriculum adjustments towards environmental science in schools would be an outstanding remedy for affluenza. The government has a major role in curbing affluenza. It would do this through its strict regulations to protect the natural environment. Social vices such as pollution, resource exploitation, and recycle issues would be effectively tackled. Affluenza entails a materialistic mindset in an existent population. People are pre-occupied by the persistent ambition to attai n more possessions. Factory owners therefore focus on maximizing production and profits. They do not have a major consideration towards the environment. In an affluent society, factories pollute the environment due to their materialistic mindset. Manufacturing industries also exploit natural resources. They do not implement recycling techniques. Such business entities have no regard towards the ramification of depletion. In this scenario, massive consumption and material possession are the applied principles. The government ought to implement clear-cut policies that oversee the preservation of all resources. Violation of the policies ought to attract legal consequences on the offenders. Legal limitations of advertisement ought to be

Establishing a Planned Giving Program Essay Example for Free

Establishing a Planned Giving Program Essay Charitable institutions play an important role in society, now more than ever, as socio-economic issues mount. The essence of charitable institutions is to facilitate the sharing or transfer of resources from those with excess to those who are wanting. The culture of giving emerged as a means of ensuring overall social welfare by pulling excess resources to segments of the population having more than they need to people without resources. Charitable institutions develop fund raising activities and schemes to encourage philanthropy as well as manage funds to translate this into programs for the targeted beneficiaries to fulfill this role effectively and continuously. The philosophy of fund raising for charitable work is that philanthropy plays an important role in democratic societies and fund raising is inevitable to philanthropy so that fund raising becomes an absolute necessity to democratic societies. (Kelly, 1998) Over the years, charitable institutions developed many fund raising processes or systems to ensure the short and long-term flow of funds necessary to support their important function. Planned giving is one long-term fund raising program that emerged. This works by providing donors with the option, other than outright giving, to defer giving to charitable institutions years after expressing the giving behavior, usually upon the death of the donor. This then focuses on assets instead of income as the measure of the capacity of donors to give. (Kelly, 1998) The rationale for this option is to facilitate the passing of assets from one generation to another through a system that allocates assets from their estates to charitable institutions upon their death according to their preference (Harrington, 2004). If people elect to pass their assets to charitable institutions then they can do so through planned giving. This also finds support in the governance system by providing incentives to philanthropy in the form of tax exemptions. II. Review of Literature A. Important Concepts and Definitions in Planned Giving Kelly (1998) conceptualized planned giving as the managed effort by charitable institutions to raise funds from gifts of assets of donors utilizing estate and financial planning processes and tools. The purpose of planned giving is to generate major gifts by offering donors with another option aside from outright giving. This fund raising scheme expands the prospect pool of donors by centering on assets, instead of income, as the determinant of the capacity to give. The sole concern of planned giving is facilitating the philanthropy of individual donors as compared to the other fund-raising efforts directed at the public. Previously, this fund raising method was known as deferred giving because financial benefits for the recipient charitable institution usually are postponed until years after the donor has set-up the gift, usually upon death resulting to the appropriation or management of the estate. The description explained planned giving in terms of the implications to charitable institutions and donors of the benefits from financial planning and incentives for planning giving. Weinstein (2002) defined planned giving, also known as charitable gift planning, as the giving of charitable contributions with some level of professional guidance. Most planned gifts have the effect of reducing the estate taxes, income taxes, and/or capital gains taxes of the donor. Charitable gift planning supports the charitable intentions of the donor while at the same time helps donors better manage their assets for their families and loved ones. Usually, planned gifts are bequests, which mean deferred actual receipt by charitable institutions. Non-profit organizations receive the bequest after the death of the donor. There are also other planned gifts, such as donations of appreciated stock, which accrue current contributions for the charitable institution. This definition focuses on planned giving as a process or system and the manner this works in supporting the fund raising activities of charitable institutions and asset management of donors. Hopkins (2005) explained that planned giving ideally concerns â€Å"long-term capital gain property† (p. 245) that is likely to increase in value. The greater the increase in value, the greater would be the charitable deduction as well as the income from tax savings. Value appreciation comprises a core concept in planned giving so that a planned gift is essentially interest in money or an item of property of the donor. Planning giving involves the transference of partial interest in property based on the concept of property as having two interests, which are income and remainder interest. The income interest from an item of property depends on the income generated by the property at the current time while the remainder interest from an item of property pertains to the projected value of the property, or the property produced by reinvestments, at some future date. As such, the remainder interest is the amount equal to the present value of the property when received at a subsequent point in time, which is higher than the income interest assuming that the property is appreciating. Measuring these two types of interest in property is through the consideration of property value, donor’s age, and the period when the income interest will exist. An income interest or a remainder interest in property could be subject to charitable donation. However, a deduction is almost never available for a charitable gift of an income interest in property. By contrast, the charitable contribution of a remainder interest in an item of property will likely give rise to a charitable deduction with compliance of all technical requirements. This provides an explanation of the manner that the system works and serves as an elaboration of the previous definitions. The explanation also provided a rationale for planned giving since remainder interest, which accrues in the future is usually always subject to charitable deductions when compared to income interest accruing at present. Hopkins (2005) further explained the two basic types of planned gifts. One is legacy or charitable giving contained under a will. This is a gift coming out of the estate of a deceased as a bequest or devise. Planned giving in the form of a legacy works through the inclusion of a charitable institution as a beneficiary of the estate of the donor with entitlement following the death of the donor. As such, this perpetuates the philanthropy of individual even in death. The amount assigned to the charitable institution comprises a tax exemption that decreases the estate tax. The other is a gift made during a donor’s lifetime, using a trust or other agreement. An example is charitable gift annuity that commences when a donor gives a charitable institution a certain amount of money that the institution can use, similar to a premium paid for insurance, but with the condition that a beneficiary receive payment of a certain amount every year. The amount given by the donor is subject to tax exemption. After the payment of annuity ceases such as with the death of the beneficiary, the charitable institutions gains the amount paid and all other interest accruing from its appropriation. This explains the options available to donors, with options supporting the charitable intentions of donors and providing them with convenient options for financial planning. B. Basic Steps in Establishing Planned Giving Program for a Non-Profit Organization Establishing planned giving program for a non-profit organization should involve some basic preparatory steps similar to a business plan in profit organizations. The first step is preparation. This involves an assessment of the capability of the organization to manage a planned giving program to determine areas requiring improvements to accommodate the program. Another must do is obtaining the feedback from the board over the development of the planned giving program since the board’s support determines a successful program. This step also involves a feasibility study to determine whether the intended program meets two criteria. One is whether the leaders and members of the organization together with donors believe in continuing its existence in the long-term and the other is whether donors express their belief in the longevity of the organization through significant gifts. (Barett Ware, 2002) In satisfying these criteria there is a higher probability of success. Second step is planning. This step covers the identification of goals and specific objectives of the program, the changes in organizational structure including the creation of committees and sub-committees and assignment of leadership positions and tasks, the plan for staffing such as part time or full time, the budget to cover all aspects of the program, and the timetable for the phases of the planned giving program. (Dove, Spears Herbert, 2002) These areas should receive focus to cover all planned program to support viability. The third step involves the identification of the program’s core and specific features. The idea of planned giving is to provide givers with various options on the ways through which they prefer to actualize their charitable intentions and manage their assets in the process. This means the need to identify the particular planned giving options that the non-profit organization would make available to its donors together with the details of how these works. (Ashton, 2004) This is for the benefit of the staff who would be directly dealing with donors and for the benefit of donors wanting to learn more about giving options offered by its preferred charitable institution. The fourth step is policymaking. Guidelines and protocols are inevitable in actualizing the planned giving program. Policies should cover issues such as legal advice, confidentiality of information, conflict in interest and authority in negotiations. Guidelines should also thoroughly explain procedures in executing and accepting planned gifts, valuation of donations, according of credit for planned gifts, investing managing and administering of planned gifts, and limitations and terms of planned gifts. Lastly, the policies should also establish the functions and roles of the committees and administrators. (Barett Ware, 2002) The fifth step is promoting the planned giving program to individual potential donors as well as the community in general. There are a number of ways for non-profit organizations to promote their planned giving programs including the handouts or leaflets, newsletters and other widely distributed publications, hosted events, seminars, and personal testimonials or referrals. The important thing is to introduce the program to people as a means of developing interest in planned giving and reaching out to existing donors who could be interested in different options. (Reiss, 2000) The sixth step is prospecting. This involves a two-fold consideration. On one hand, this involves the determination of the likely uptake of the program by considering potential donors including the involvement in planned giving by members of the board themselves. This results to identification of anticipated long-term fund raising position of the organization. On the other hand, this also involves the determination of the impact of the program including the possible issues and problems to support contingency planning. (Rosso, 2003) C. Establishing Goals and Objectives for Planned Giving Program Goals comprise statements of the position or outcome that the organization wants to gain while objectives set out the manner of achieving this position or outcome (Lewis, 2006). Establishing the goals and objectives of the planned giving program also goes through a series of interconnected cyclical processes. The first process is communication and clarification of issues, problems, challenges or opportunities that provide a context for establishing the program. These support the determination of goals. If a challenge is giving options then the goal would be diversified giving options for donors and the objective is the development of a planned giving program. (Lauer, 1997) The second process is evaluation of alternative solutions to express needs and requirements into goals and objectives through measures of success that would also constitute the criteria for evaluating the extent of fulfillment of the goals and objectives. (Lauer, 1997) The third process is articulation by drawing the participation of all stakeholders in providing perspectives over the areas for improvement and drawing consensus on actions (Lauer, 1997).

Business process management (BPM)

Business process management (BPM) Literature Review 2.1 Definitions 2.1.1 What is Business Process Management? Business Process Management (BPM) was influenced by concepts and technologies from business administration and computer science. BPM had its root in process-oriented trends and was treated as a management philosophy since mid 1990s (James F. Chang, 2006; Mathias Weske, 2007). Studies investigating BPM had been carried out several management principles and practices were associated. Most of these concepts were identical to Business Process Reengineering (BPR) and Total Quality Management (TQM) concepts. In the book Business Process Management: Concepts, Languages, Architectures, Mathias Weske had quoted from Davenport, who defined business process as: a set of logically related tasks performed to achieve a defined business outcome for a particular customer or market. And a specific ordering of work activities across time and place, with a beginning, an end, and clearly identified inputs and outputs. However, Mathias Weske (2007) had adopted definition as: A business process consists of a set of activities that are performed in coordination in an organizational and technical environment. These activities come together to make a business goal became achievable. Every single business process is performed by a single company, but it may interact with business processes performed by other companies. From the business process definition, Mathias Weske (2007) had defined the concept of BPM as: Business process management includes concepts, methods, and techniques to support the design, administration, configuration, enactment, and analysis of business processes. The basis of BPM had explicit representation of business process with their activities and execution constraints between them. When BPM defined, people could analysis, improvement and enactment with BPM. In traditionally, business process had manually executed as usual by knowledge personnel, regulations of company, and installed procedures. Nowadays, company had more additional benefits by apply Information Technology like Business Process Management System (BPMS) when coordinating activities involved by business process. 2.1.2 What is Business Process Management System (BPMS)? According to definition of James F. Chang (2006), BPMS is a new class of software that allows organizations to devise process-centric information technology solutions. Process-centric means BPMS solutions are able to integrate people, systems, and data. BPM fills the gap between the wide-open, unstructured world of collaboration and the precise transaction processing of enterprise applications. It has become widely realized that important enterprise processes routinely cross the boundaries of enterprise applications. Processes like order-to-cash or procure-to-pay may involve several enterprise applications such as taking orders in CRM, ERP creating invoices and purchase orders, and managing production and fulfilment in SCM. BPM, especially in combination with services that can move data in and out of enterprise applications and other information sources provide a way to clear define, manage, and automate processes that span enterprise applications. BPM also allows processes that bring in people and systems from outside the company to the defined process. In this way, BPM supports processes that take place across an extended business network. The personalities of processes currently automated by BPM are as follows: They are more structured than the loose collaboration based on email and other such mechanisms They are more flexible than the transactional processes in enterprise applications They are wider in scope than processes in enterprise applications, crossing both application and company boundaries Their flow is explicitly defined, managed, and automated 2.1.3 What enabling standards and technology support BPMS? When evaluating and adopting BPM technology, two standards are referenced over and over: BPMN and BPEL. To fully understand what BPM technology does, it is important to understand the role of these and other standards, which provide a common infrastructure for process modeling and automation. Business process modeling notation (BPMN) is a standard for the visual definition of business processes. Most of the modern tools for business process modeling support BPMN or are based on it. BPMN defines the primitive constructs that are used to represent business processes, such as starting points, ending points, process steps, decision points, and so on. Business process execution language (BPEL) is a standard for expressing the steps required to execute a business process by invoking a series of web services. BPEL is more like a programming language for carrying out a business process than a modeling system for describing the process flow. Web services technology standards are vital to BPM because they enable web services to communicate with enterprise applications and other systems using appropriate mechanisms for security, self-discovery, versioning, and other important matters. Industry standards for web services define specific sets of services that are used to automate communication between two companies in a particular industry. BPMS frequently makes use of such web services when creating systems that cross company boundaries and incorporate partner companies into a process. 2.1.4 What is Business Process Modelling? Business process modelling is the art of describing how work is done in a company at the appropriate level to achieve the desired communication. The typical goals of business process modelling are to capture a process so that it can be better understood and improved or to describe a process in detail and associate it with technology so that it can be automated. A business process model in general is simply a description of a business process. Visual business models are description of the steps that take place during a process and frequently represent in flowcharts such as the one shown in Figure 3, although other forms of models such as numerical equations or systematic procedures are also sometimes used. 2.2 Main functions of BPMS Here is a list of the most common components and management mechanisms that are involved in application assembly. Web services. BPM needs SOA. The act of creating executable business process models is the start of creating new applications to help automate and support business processes. To allow each business process step to interact with the world, web services are needed to create a two-way communication with enterprise applications and to reach out to other sources of information and functionality on the Web. Business rules. Process steps can involve the application of sets of business rules that determine some sort of result, based on the inputs passed in and the rules in effect. Rules could be used to determine the routing of a document, the credit score of an individual, or a suggestion for a product to upsell. User interfaces. When process steps need to interact with people to collect information or to define a task that must be performed manually, a user interface is needed. In this way, a user interface is a component that is included in the set of parts that are assembled into a working application by the BPM process automation technology. User interface components can be generated automatically, based on interactions implied by web services, business rules, or data required by process steps. User interface components can also be created by users and developers using a variety of tools. Modeling and orchestration tools. Modeling and orchestration tools are used at many different levels of a BPMS. The center of a BPMS is usually an environment for modeling used to define business process models or the orchestration of services. Modeling can be used to create services and user interfaces. Modeling also can be used to define the integration and mapping of data from one source to another. Simulation tools. In order to understand the flow of work through a proposed business process, simulation tools may be employed. Assumptions are made about the amount of inputs to each process and the amount of time it takes to perform each process step. In this way bottlenecks or key areas for optimization can be found. These key areas can be closely monitored to find problems early on in implementations or to confirm the validity of assumptions. Model and process repositories. When models are created, they must be stored in repositories, which allow them to be accessed and shared by large groups of people. In any large program of BPM adoption, some processes are used over and over. These process components must be stored in a central location and reused in other business process models. Web services repositories. To link business process steps and user interfaces to the invocation of services, it is important to be able to find services, understand what they do, and identify the data sent and retrieved through them. Web services repositories contain information about the interfaces and functionality of the services and the underlying applications the services are connected to at runtime. Integration tools. It is not uncommon for a business process to require two systems to work together in specific ways. Perhaps a purchase order must be transferred from the CRM application to ERP. Frequently, the BPMS does not contain the capability to perform such integration and so other integration tools must be used to create the needed functionality. The BPM tools then invoke a service that performs the integration defined by the integration tools. In this way, specific integrations become components used by BPM technology. Centralized task management. One of the most important transitions in a business process model occurs when a software application asks a person to perform a task. It is vital that the task to be performed be adequately described and that the results of performing the task be recorded. A single user may be getting requests to perform tasks from many different business process applications. Centralized task management components create a single inbox into which all requests from business process applications are sent, which streamlines monitoring and executing those tasks. Process and activity monitoring tools. Once an application has been created using a BPMS, it is important to monitor the business process model during execution. By monitoring the activity of specific steps, it is possible to monitor not only the technological activity of the system such as database reads and writes or network traffic, but also the progress of the business process, that is, number of purchase orders created or customer service requests handled. Systems created based on business process models take a large step toward achieving the promise of the field of business activity monitoring, complex event processing, predictive analytics, and simulations. These main functions would provide the basis for evaluation of BPMS platforms. 2.3 BPMS platforms evaluation From the main functions of BPMS, the author has evaluated four platforms to support the implementation stage. These four platforms were Drools 5, jBPM 4.3, OSWorkflow 2.8, and ARIS. The critical evaluation framework has been discussed in the main functions of BPMS within this chapter. The evaluation framework included: Web services Business rules User Interface Widgets Modelling and Orchestration tools Simulation tools Model and process repositories Web service repositories Integration tools Centralized task management Process and activity monitor tools The marking guidance has included at appendices. The guidance provided descriptions for each mark from 0 to 10.The investigation of BPMS has marked these platforms base on the evaluation framework and marking guidance then ploted to charts. 2.3.1 Drools 5 Business Logic Integration Platform Drools was a open-source business rule management system (BRMS) with a forward chaining inference based rules engine, more correctly known as a production rule system, using an enhanced implementation of the Rete algorithm. Adapting Rete to an object-oriented interface allows for more natural expression of business rules with regards to business objects. Drools is written in Java, but able to run on Java and .NET. Drools has been supported by JBoss since 2005 and renamed to JBoss Rules. Drools 5 have been released on May 2009. The main goals of this release were introducing Complex Event Processing (CEP) engine (in Fusion module) and workflow capabilities (in Flow module). On the release of Drools 5, it has changed name from Business Rule Management System (BRMS) to Business Logic integration Platform (BLiP) with modules: Drools Guvnor (BRMS/BPMS) Drools Expert (rule engine) Drools Flow (process/workflow) Drools Fusion (event processing/temporal reasoning) Advantages: The platforms had Drools Expert; it was an excellent rule engine, developed as the first-class module in mind. The platform received ten marks for business rule function because it had long time development and matured enough for production environment. Drools Guvnor combined with Drools plug-in on Eclipse were outstanding at BRMS and editor. The combination help user easily draw; manage models on both Web and desktop IDE (integrated develop environment). It helped the platform received eight marks for modelling tools, nine marks for model repository, and eight marks for centralized task management. Disadvantages: The documentation of platform did not have any mention about web service on whole platform. That meant the platform did not support web service either BPEL standard. According to the official user guide at Drools website, the integration ability with OpenBravo ERP and OSWorkflow were still under developing at time this report conducted. The platform received one mark for integration function. 2.3.2 jBPM 4.3 jBPM is a platform for executable process languages ranging from business process management (BPM) over workflow to service orchestration. jBPM supports three different process languages. Each one is targeted towards a specific function and environment. *jBDL*BPEL*Pageflow jBPM builds all these process languages natively on top of a single technology: the Process Virtual Machine (PVM). Even as the BPM industry converges towards new standards, the investment in jBPM is protected; the PVM foundation will remain stable. Advantages: The supporting of BPEL has gave jBPM a good marks (eight) at web service function. Support BPEL has also meant this platform good in integration with legacy systems. The ability of generate form for human interaction workflow was the good function that included in jBPM. This ability contributed seven marks for user interface widget function. Modelling, repositories, and centralized task management were the advantages of jBPM. This platform developed some plug-in for Eclipse to create the Graphical Process Designer. This approach gave the power of Eclipse to business process on both graphical modelling and debugging. Disadvantages: The investigation shown the weakness of jBPM was the lacking of simulation tools. Simulation tools helped process designer in bottle-neck solving. The simulation function of jBPM was under developing at time of this report conducted. 2.3.3 OSWorkflow 2.8 OSWorkflow is a mature open-source Java workflow engine. It is mainly aimed at the programmer and not an end user or business analyst. For the end user or business analyst, it includes a user-friendly visual workflow modeller designed only for basic usage. Advantages: The strength of OSWorkflow showed at modelling tools and Disadvantages: 2.3.4 ARIS Advantages: Disadvantages: 2.3.5 Conclusion 2.4 Summary